Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grand Cherokee
+ Cars of mark Jeep Grand Cherokee
+ Options and routine maintenance
+ Рядный the six-cylinder engine
+ Engine V8
- Procedure of the general and engine major repairs
   The general information
   Engine major repairs - the general information
   Check компрессионного pressure in cylinders
   The diagnostic checks made by means of the vacuum gauge
   Methods of removal of the engine and necessary safety measures
   Removal and engine installation
   Variants of restoration of the engine
   Order of dismantling of the engine
   Dismantling of a head of cylinders
   Cleaning and check of a condition of a head of cylinders
   Service of valves
   Assemblage of a head of cylinders
   Removal of shatunno-piston assemblages
   Removal of a cranked shaft
   Cleaning of the block of the engine
   Check of a condition of the block of the engine
   Хонингование cylinders
   Check of a condition of shatunno-piston assemblages
   Check of a condition of a cranked shaft
   Check of a condition radical and шатунных bearings
   Assembly order of the engine after end of its major repairs
   Installation of a cranked shaft and check of backlashes of radical bearings
   Installation of piston rings
   Installation of shatunno-piston assemblages and check of backlashes in шатунных bearings
   The first start of the engine after major repairs
+ Systems of cooling, heating and air conditioning
+ The power supply system and release of the fulfilled gases
+ System of an electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of a gear change
+ Automatic transmission
+ Distributing box
+ Coupling and трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of an onboard electric equipment
+ Controls and operation receptions


e65f60b7

Methods of removal of the engine and necessary safety measures

If the situation analysis has shown necessity of removal of the engine for carrying out of its capital or general repair, some preparatory steps should be undertaken.

Presence of a suitable workplace is the important condition of successful performance of repair in the higher measure. The convenient working platform with a place for car parking Is required. If using a garage premise or a premise of a workshop of car-care centre is impossible, a necessary condition is presence at least a flat horizontal platform with a firm covering (it is desirable asphalt or concrete).

Careful cleaning of an impellent compartment and the engine before its extraction from the car will allow to keep the tool during procedure performance clean and an order that appreciably helps the correct organisation of works.

The necessary requirement is presence лебедки or the A-shaped frame. Make sure that the got or hired equipment corresponds under the load-lifting characteristics to the requirement on keeping of total weight of the engine with all hinged units. The basic condition during carrying out of the given work is the safety of its performance reached at the expense of observance of corresponding security measures.

If independent extraction of the engine is made by the mechanic-fan for the first time, presence of the assistant is desirable. Useful there will be also a timely council of more skilled expert. During engine posting there is a set of the moments when necessity of simultaneous performance of several operations does work by forces of one person almost impossible.

Carefully plan all course of forthcoming works. Take care of preliminary acquisition or rent of the necessary special equipment and the tool. (Except the elevating equipment) it is possible to carry to number of the adaptations doing procedures on extraction of the engine and its installation into place more safe and convenient also such, as powerful floor (тележечный) a jack, the complete set of wrenches and replaceable heads (the Tool see), wooden blocks, and also enough of rags and solvent for gathering of the spilt oils, fuel and a cooler and destruction of their traces. If the load-lifting equipment is planned to hire, it is necessary to take care of it the day before and beforehand to make all preparatory procedures and procedures which can be executed before connection of an elevating rigging. Such approach will allow to save time and means.

Be ready to refusal of using the car for the period of carrying out of major repairs of the engine. For performance of some procedures it is necessary to take advantage of automobile repair shop services (it is a question of the procedures which performance demands application special and станочного the equipment). Such workshops usually have very much a loading busy schedule, therefore it is necessary to take care beforehand of the arrangement on performance of demanded repair.

At extraction and engine installation always observe extreme care. The neglect this requirement is fraught with reception of serious traumas and mutilations. Preliminary planning, preparation and carefulness of performance of all procedures are pledge of successful end of work.