Jeep Grand Cherokee

1993-1999 of release

Repair and car operation



Jeep Grand Cherokee
+ Cars of mark Jeep Grand Cherokee
+ Options and routine maintenance
+ Рядный the six-cylinder engine
+ Engine V8
+ Procedure of the general and engine major repairs
+ Systems of cooling, heating and air conditioning
- The power supply system and release of the fulfilled gases
   The general information
   Procedure of dump of pressure of fuel
   Check of pressure of fuel and functioning of the fuel pump
   Removal and installation of a fuel tank
   Cleaning and repair of a fuel tank - the general information
   Repair and replacement of fuel lines
   Removal and installation of the fuel pump
   Check of serviceability and replacement of the block of the gauge of level of fuel
   Removal and installation of assemblage of an air cleaner
   Replacement of a cable of gas
   System of injection of fuel - the general information
   Check of serviceability of system of injection of fuel
   Serviceability check, removal and installation of the case of a throttle
   Check of serviceability and replacement of a regulator of pressure of fuel
   Serviceability check, removal and installation of injectors of fuel
   Check of functioning and replacement of components of system of stabilisation of turns of idling (IAC)
   Service of system of release of the fulfilled gases - the general information
+ System of an electric equipment of the engine
+ Systems of decrease in toxicity of the fulfilled gases and engine management
+ Manual box of a gear change
+ Automatic transmission
+ Distributing box
+ Coupling and трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ System of an onboard electric equipment
+ Controls and operation receptions

e65f60b7


Removal and installation of the fuel pump

The prevention in the beginning see Procedure of dump of pressure of fuel Has undressed.


 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  2. Dump pressure in the power supply system (Section Procedure of dump of pressure of fuel).
  3. Remove a fuel tank (Has undressed Removal and installation of a fuel tank).
  4. Remove ventilating lines and-or the fuel hoses limiting the approach to a cover of access to the fuel pump.
  5. Cautiously tapping on external edge of a cover with a screw-driver, give a cover, rotating it counter-clockwise. Uncover assemblage.
  1. Cautiously tapping with a screw-driver or stupid выколоткой on external edge of a cover, give it, rotating counter-clockwise.
  1. Take the fuel pump from a tank.
  1. Taking the fuel pump from a tank, try not to damage поплавковую assemblage of the gauge of level of fuel.
  1. In default the pump it should be replaced together with the gauge of level of fuel. An individual order any of blocks (the pump and the gauge) is not subject to service.
  2. Installation make upside-down. Do not forget to establish a new lining on a cover flange.