Remove facings of a control panel and facing of the panel of switches (the Head the Body).
Give screws and remove the switch of a heater of glass of a door of a back from facing.
By means of the wire equipped with clips short-circuit the plug three on weight, then with the second wire provide giving on the plug of 1 switch of pressure in 12 V.Esli a switch lamp does not light up, replace it.
If the switch lamp lights up, remove wires and connect an ohmmeter (or a sampler with the independent power supply) between plugs 2 and 3 switches, then press the button of the last. Ohmmeter indications should not be less than 1 Ohm. Otherwise replace the switch.
|
|