- Disconnect a negative wire from the battery.
- Remove the central facing of a combination of devices (Has undressed Removal and installation of facings of a control panel).
- Give two screws behind the top part of the central facing which serve for fastening of the panel of devices.
- Having hooked, take a nozzle lattice blowing a windscreen, disconnect any available gauges and will put a lattice aside.
- Give four screws in a sleeve blowing glasses which serve for fastening of the panel of devices.
|
- Give sleeve screws blowing a windscreen (arrow).
|
- Open a ware box, give two screws of fastening of the panel of devices, then pull the panel upwards, liberating it from clamps along the edges.
- Give three screws of fastening of facing of a combination of devices to the panel of devices, remove facing.
|
- Give screws of fastening of facing of a combination to the panel of devices (arrow).
|
-
Installation make upside-down.
|
|