Поддомкратьте the car also establish it on props.
Take шплинт and give a nut of fastening of a spherical hairpin on an arm of a beam of a frame. Шплинт throw out. After отдавания nuts the spherical hairpin should drop out of an arm. If it does not occur, it is necessary to take advantage вильчатым of a divider of spherical hinges. For the purpose of minimisation of risk of damage of a cover of the hinge preliminary grease the tool and a cover.
|
|
Details of fixture of a cross-section jet bar (lobby).
|
|
|
If the spherical hairpin on the top end of a jet bar does not give in to extraction from the top arm of a frame, take advantage вильчатым of a divider of spherical hinges.
|
Give a bolt with a nut of fastening of a jet bar to an arm on right (from the party of the passenger) the forward end картера the bridge and remove a bar.
|
|
Give a bolt (arrow) with a nut (in a picture it is not visible) and separate the bottom end of a jet bar from a frame arm картера the bridge.
|
Installation make upside-down. Fixture tighten with demanded effort.
|
|
